Izotope Trash 2 Mac !EXCLUSIVE! Crack Software

iZotope Trash 2: A Powerful Distortion Plugin for Mac

If you are looking for a versatile and creative distortion plugin for your Mac, you might want to check out iZotope Trash 2. This plugin is designed to help you shape and transform your sounds with over 60 distortion algorithms, 20 filter types, and 100 impulse responses. Whether you want to add some grit, warmth, crunch, or chaos to your audio, Trash 2 can handle it.

Trash 2 is not just a simple distortion plugin. It is a multi-band, multi-stage effect that lets you control every aspect of your signal. You can split your audio into up to four frequency bands and apply different distortion types, filters, dynamics, and convolution effects to each band. You can also use the Trash module to choose from six different distortion stages and tweak the drive, tone, bias, and feedback settings. You can even design your own distortion curves with the custom waveshaper.

One of the most unique features of Trash 2 is the Convolve module. This module lets you apply realistic or surreal convolution effects to your audio using impulse responses. You can choose from over 100 impulse responses that emulate various speakers, cabinets, rooms, and devices. You can also load your own impulse responses or use the Trash module as a source. The Convolve module also has a mix control, a width control, and an envelope follower for dynamic modulation.

Trash 2 also comes with a powerful output section that includes a limiter, a spectrum analyzer, and a level meter. The limiter helps you prevent clipping and distortion at the final stage of your signal chain. The spectrum analyzer shows you the frequency distribution of your audio and lets you compare it with the original signal. The level meter shows you the peak and RMS levels of your audio and warns you if they exceed the threshold.

Trash 2 is a plugin that can be used for various purposes and genres. You can use it to enhance vocals, guitars, drums, synths, or any other sound source. You can use it to create subtle saturation, warm overdrive, crunchy distortion, or extreme noise. You can use it to emulate vintage gear, modern devices, or futuristic sounds. You can use it to add character, depth, movement, or excitement to your audio.

If you want to try out Trash 2 for yourself, you can download a free trial from iZotope's website[^1^]. You can also read more reviews about Trash 2 from MusicRadar[^2^] and other online sources. Trash 2 is compatible with Mac OS X 10.8 or later and supports VST, AU, RTAS, AAX, and AudioSuite formats.In this article, we will show you some examples of how to use Trash 2 to create different effects on your audio. We will use a simple guitar loop as our source and apply various presets and settings from Trash 2. You can follow along with your own audio or download the guitar loop from here.

Example 1: Warm Tube Drive

For this example, we want to add some warm tube drive to our guitar loop. We will use the preset \"Warm Tube Drive\" from the Guitar category and tweak it a bit to suit our taste. Here are the steps:

Load the preset \"Warm Tube Drive\" from the Guitar category.

Adjust the input gain to -6 dB and the output gain to -3 dB.

In the Trash module, select the band 1 and change the distortion type to \"Tube - Soft\".

In the band 1 settings, increase the drive to 10 dB and reduce the tone to 0.5.

Select the band 2 and change the distortion type to \"Tube - Hard\".

In the band 2 settings, increase the drive to 8 dB and reduce the tone to 0.7.

In the Filter module, select the band 1 and change the filter type to \"Low Shelf\".

In the band 1 settings, increase the frequency to 200 Hz and increase the gain to 3 dB.

Select the band 2 and change the filter type to \"High Shelf\".

In the band 2 settings, decrease the frequency to 8000 Hz and decrease the gain to -3 dB.

Bypass the Dynamics and Convolve modules.

Here is how our guitar loop sounds before and after applying Trash 2:

Your browser does not support the audio element.

Original guitar loop

Your browser does not support the audio element.

Guitar loop with Warm Tube Drive

As you can hear, Trash 2 adds some nice warmth and saturation to our guitar loop. The tube distortion types give it a smooth and natural sound. The low shelf filter boosts the low frequencies and adds some body. The high shelf filter cuts the high frequencies and reduces some harshness. The result is a warmer and fuller sound that still retains some clarity and dynamics.

Example 2: Crunchy Distortion

For this example, we want to add some crunchy distortion to our guitar loop. We will use the preset \"Crunchy Distortion\" from the Guitar category and tweak it a bit to suit our taste. Here are the steps:

Load the preset \"Crunchy Distortion\" from the Guitar category.

Adjust the input gain to -6 dB and the output gain to -3 dB.

In the Trash module, select the band 1 and change the distortion type to \"Clip Control - Hard Clip\".

In the band 1 settings, increase the drive to 12 dB and increase the tone to 0.9.

Select the band 2 and change the distortion type to \"Saturate - Tape Saturation\".

In the band 2 settings, increase the drive to 10 dB and increase the tone to 0.8.

In the Filter module, select the band 1 and change the filter type to \"Band Pass\".

In the band 1 settings, increase the frequency to 500 Hz and decrease

the Q to 0.5.

Select

the band 2 and change

the filter type

to \"Band Pass\".In

the band

2 settings,

decrease

the frequency

2000 Hz

and decrease

the Q

0.5.Bypass

the Dynamics

and Convolve modules.Here is how our guitar loop sounds before and after applying Trash 2:Your browser does not support

the audio element.Original guitar loopYour browser does not support

the audio element.Guitar loop with Crunchy DistortionAs you a474f39169