Samsung Clone Glaxy Note8 SM-N950 Flash File Firmware Stock Rom MT6580 7.0

Click Here >>> https://blltly.com/2tuq7K

How to Download and Install Samsung Clone Glaxy Note8 SM-N950 Flash File Firmware Stock Rom MT6580 7.0

If you have a Samsung Clone Glaxy Note8 SM-N950 device and you want to flash it with the official stock firmware, then you are in the right place. In this article, we will show you how to download and install the Samsung Clone Glaxy Note8 SM-N950 flash file, firmware, stock rom, and MT6580 7.0 on your device using Odin tool.

Flashing your device with the official firmware can help you to fix various issues such as bootloop, stuck on logo, lagging performance, virus infection, etc. It can also help you to upgrade or downgrade your device's software version, or restore it to the factory settings.

Before you proceed with the flashing process, make sure you have backed up all your important data and files, as they will be erased during the process. Also, make sure you have a sufficient battery level (at least 50%) and a stable internet connection. You will also need a Windows PC and a USB cable to connect your device to the PC.

Steps to Download and Install Samsung Clone Glaxy Note8 SM-N950 Flash File Firmware Stock Rom MT6580 7.0

Download and install SamFirm tool on your PC. This tool will help you to download the official Odin firmware files directly from Samsung servers[^1^].

Download and install Samsung Galaxy Note8 SM-N950F firmware on your PC. This is the original firmware for your device model[^2^].

Download and install WD_BLACK SN850X NVMe SSD on your PC. This is a high-performance SSD that will speed up your flashing process[^4^].

Extract the downloaded firmware file using any zip extractor tool. You will get a .tar or .tar.md5 file that contains the firmware components.

Download and install Samsung USB drivers on your PC. This will help your PC to recognize your device when connected via USB[^3^].

Download and install Odin tool on your PC. This is a flash tool that will help you to flash the firmware file on your device.

Boot your device into download mode by pressing and holding Volume Down + Bixby + Power buttons together for a few seconds. When you see a warning screen, press Volume Up to continue.

Connect your device to the PC using a USB cable. Odin tool should detect your device and show a blue or green box in the ID:COM section.

In Odin tool, click on AP button and select the .tar or .tar.md5 file that you extracted from the firmware file.

Make sure that only Auto Reboot and F.Reset Time options are checked in Odin tool. Do not check any other options or change any settings.

Click on Start button in Odin tool to begin the flashing process. Wait for a few minutes until you see a PASS message in Odin tool.

Your device will reboot automatically after the flashing process is completed. You can disconnect your device from the PC and enjoy the new firmware on your device.

Congratulations! You have successfully downloaded and installed Samsung Clone Glaxy Note8 SM-N950 Flash File Firmware Stock Rom MT6580 7.0 on your device using Odin tool. a474f39169