Walton Primo NH3 Lite Flash File Lcd Display Dead Fix !!HOT!!

How to Fix LCD Display Dead Problem on Walton Primo NH3 Lite with Flash File

If you are using a Walton Primo NH3 Lite smartphone and have encountered a problem with the LCD display being dead or not working properly, you may need to flash your phone with a new firmware. Flashing your phone can solve various software issues, such as hang on logo, auto restart, camera error, unknown baseband, monkey virus, etc. In this article, we will show you how to download and install the Walton Primo NH3 Lite flash file firmware on your device.

What is Walton Primo NH3 Lite Flash File Firmware

Walton Primo NH3 Lite flash file firmware is a software program that contains the operating system and other files of your phone. It is stored in the internal memory or ROM of your device. Sometimes, due to various reasons, the firmware of your phone may get corrupted or damaged, causing your phone to malfunction or become unusable. In such cases, you need to flash your phone with a new firmware to restore its normal functionality.

Where to Download Walton Primo NH3 Lite Flash File Firmware

You can download the Walton Primo NH3 Lite flash file firmware from various online sources, such as NeedFlashRom, AndroidFixFlashFile, Martview-Forum, etc. However, you need to make sure that the firmware you download is compatible with your device model and version. You also need to check the file size and format before downloading. The Walton Primo NH3 Lite flash file firmware we are providing here is based on Android 7.0 Nougat and has a file size of 1.2 GB. It is in zip format and contains the scatter file, flash tool, USB driver, and flashing guide.

How to Install Walton Primo NH3 Lite Flash File Firmware

To install the Walton Primo NH3 Lite flash file firmware on your device, you need to follow some steps carefully. You also need to have some prerequisites, such as a computer, a USB cable, a backup of your data, and a battery charge of at least 50%. Here are the steps to flash your phone:

Download and extract the Walton Primo NH3 Lite flash file firmware package on your computer. You will get four files: MT6580__Walton__Primo_NH3__Primo_NH3__7.0__alps-mp-n0.mp2-V1_vs6580.we.n_P29 (the firmware file), SP Flash Tool (the flash tool), MTK USB VCOM Driver (the USB driver), and Flashing Guide (the manual).

Install the MTK USB VCOM Driver on your computer. This will help your computer to recognize your device when connected.

Open the SP Flash Tool folder and run the flash_tool.exe file as administrator.

Click on the Scatter-loading button and browse to the firmware folder. Select the MT6580_Android_scatter.txt file and click Open.

Make sure all the partitions are checked and click on the Download button.

Turn off your phone and remove the battery if possible. Then connect it to your computer via USB cable while holding the Volume Down or Volume Up button.

The flashing process will start automatically and you will see a progress bar on the screen. Wait until it reaches 100% and you see a green tick mark.

Disconnect your phone from the computer and insert the battery if removed. Then turn on your phone and wait for it to boot up.

Congratulations! You have successfully flashed your Walton Primo NH3 Lite smartphone with the flash file firmware. You can now enjoy a smooth and stable performance on your device.

Conclusion

In this article, we have shown you how to fix LCD display dead problem on Walton Primo NH3 Lite with flash file firmware. We hope this guide was helpful for you and you were able to solve your issue. If you have any questions or suggestions, feel free to leave a comment below. aa16f39245